USF-2000A - Specs
Ultrasonic Fatigue Testing System
USF-2000A
Test frequency |
20 kHz ±500 Hz (recommended test range: 20 kHz ±30 Hz) |
---|---|
Vibration at horn tip |
±10 to ±50 μm |
Test stress range |
Stress given ±10 to ±50 μm displacement of sample |
Stress ratio |
-1 |
Testable materials |
Materials that can be resonated at 20 kHz and generate minimal heat during resonance |
Not-testable materials |
- Materials that cannot resonate at 20 kHz |
Power Requirements |
3-phase 200 V: 2 kVA (air compressor) , 1-phase 200V: 3.5 kVA (ultrasonic fatigue testing system) , 1-phase 100V: 1 kVA (computer, displacement logger, air dryer, etc.) |
Standard contents |
USF-2000A Ultrasonic Fatigue Testing System main unit (including table), ultrasonic resonance system, control computer,ultrasonic testing control and measurement software, and cooling unit (air dryer and compressed air lines) |
Required optional products |
Air compressor (for regions with 50 Hz or 60 Hz power) 3-phase 200 V: 2 kVA |
Note: Systems can be selected without an air compressor in cases where the customer will supply the compressed air. A 150 L/m flow rate of compressed air at a minimum 0.2 MPa is required.