DPiMS™ QT - Specs

Kit for Direct Probe Ionization Mass Spectrometer

Installation requirements*

Room temperature	18 to 28 °C
Humidity	20 to 70 % (No-condensing and no-discharge due to static electricity)
Others	Should be installed in an environment without dust, oscillation, electromagnetic noise, corrosive gas and electromagnetic interference.

*Equivalent to the installation requirement of mass spectrometer.

Hardware

DPiMS QT controller	Control of the DPiMS QT unit (Installed in the mass spectrometer)
DPiMS QT unit	Probe Voltage: ±5 kV max. (set voltage) Probe Stroke: 46.30 mm max. Number of Extraction Cycles: 300 max. Probe Speed: 300 mm/sec max. Probe Acceleration: 1 G max. Probe Stop Time: 60,000 msec max. Probe drive cycle: 0.75 to 3 Hz

Software

PESI MS Solution LabSolutions	Used to select analytical conditions and start analysis Used to specify MS analysis method settings and analyze data
(Probe Control Software)	Used to specify probe control method settings

Consumables

Probe	Probe (set of 10 or 50 pcs.)
Plate	Plates available for both liquid and biological samples (set of 100 pcs. each)

{"title":"Specification Sheet Downloads","description":"Download the latest specification sheets.","source":"product","key":4631,"max":"30","filter_types":["spec_sheet"],"link_title":"View other Downloads","link_url":""} {"title":"Downloads","description":"Download the latest brochure.","source":"product","key":4631,"max":"30","filter_types":["brochures"],"link_title":"View other Downloads","link_url":"","pdf_links":[]}