- Newly designed high-sensitivity NDIR achieves ultrahigh sensitivity measurements.
- Sensitivity and accuracy enhanced by minimizing the reagent blanks that hinder accurate analysis./li>
- Powerful oxidation through a combination of peroxosulfuric acid, UV illumination, and heating.
- No need of purging of reagent bottle reduces consumption of carrier gas
Phosphoric acid and the oxidant (persulfate) are added to the sample, which is heated under UV illumination to convert the TC in the sample to carbon dioxide. This carbon dioxide flows with the carrier gas via the dehumidifier into the NDIR sample cell. The area of the carbon dioxide peak signal is measured and this peak area is converted to TC concentration using a pre-prepared calibration curve.
The sample is acidified with phosphoric acid and sparged to convert the IC in the sample to carbon dioxide. This carbon dioxide is detected by the NDIR and the sample IC concentration is measured in the same way as TC.
Subtracting the IC concentration from the TC concentration determines the TOC concentration.
The sample is acidified with phosphoric acid and sparged to eliminate the IC. The NPOC concentration is determined by measuring the TC (=NPOC) of the sample after the IC is eliminated, using the same method as for TC measurement.
This page may contain references to products that are not available in your country.
Please contact us to check the availability of these products in your country.