Automatic span calibration
Choice of fully-automatic calibrations: PSC and Clock -CAL
Operator can choose from two types of fully-automatic span calibration methods. "PSC" is initiated based on temperature change detection, and "Clock-CAL" operates at user pre-set times (up to three times a day).
Fully-automatic calibration Clock-CAL (AUW only)
Automatic calibration at user-preset times.
The balance automatically performs calibration at selected times, up to three times a day (e.g. before starting work, during lunch-break or after work).
Fully-automatic calibration PSC (AUW and AUX only)
The balance detects variations in the ambient temperature that influence accuracy and automatically performs calibration to compensate it.
GLP/GMP/ISO calibration report (AUW and AUX only)
Calibration report can be automatically printed with the optional electronic printer. Date, time, serial number and ID are also output to meet GLP/GMP/ISO requirements.
The balance communicates directly to a PC with Windows® applications. No additional software is needed to interface with spreadsheets, databases, word processing, and laboratory software. WindowsDirect works with Windows® 95, 98, 2000, NT4.0, ME and XP. PC must be IBM PC/AT compatible.
Connection to Windows Vista and Windows7.
Interval timer (AUW and AUX only)
Weighed data can be output to external devices at user pre-set intervals.
Piece counting mode
Specific gravity measurement
Below-weigh hook for Hanging measurement
Backlit LCD (AUW only)
LCD with backlight can be read with ease and comfort under any lighting condition.
This page may contain references to products that are not available in your country.
Please contact us to check the availability of these products in your country.